2. Pairing the AVVENTURA to a smartphone
Pairing with the Cateye Cycling™ app is required for configuring various AVVENTURA settings.
Important
Do not pair the AVVENTURA at a race venue or in similar locations where there are a lot of other users. Doing so may cause the AVVENTURA to be paired with another device.
AVVENTURA
1. Press and hold 
(POWER) on the AVVENTURA for 1 second.
The unit turns on and “GPS Searching” flashes on the screen.
Power off
(1 second)
GPS searching
* If the screen is not displayed even when pressing and holding (POWER) for 1 second, or if only the battery icon is displayed flashing ( ), charge the AVVENTURA.
2. Open the jack cover on the back of the AVVENTURA, and press the AC button.
Jack cover
The initialization screen is displayed.
Caution
Keep the jack cover firmly in place to maintain waterproofness.
3. Press MODE once to choose [Format] and it will flash, and then press the SS button to confirm.
Caution
All data will be deleted and the settings will be reset to factory default.
Format
↕
Restart
Enter
The measurement screen switches to the GPS search screen.
GPS searching
Smartphone
4. Launch Cateye Cycling™, tap [Start] to begin pairing.
* If the startup screen does not appear, tap (Startup) at the top left corner of the screen to display it.
Tap [Pairing] to search for pairable devices.
When Cateye Cycling™ detects the AVVENTURA, a message is displayed on the smartphone.
Tap [Pairing] to complete pairing of the AVVENTURA.
* If the device name is different than expected, tap [Skip], and then tap [Pairing] again.
Repeat until the AVVENTURA is displayed.
AVVENTURA pairing is now complete.
Important
If a firmware update notification is displayed on the smartphone after pairing, tap [Update] to update the firmware.
Updating will not be possible if the remaining battery power is low. Charge the AVVENTURA to perform the update.
• If you have Bluetooth® sensors:
Proceed to “3. Pairing an Bluetooth® sensor”.
• If you only have ANT+ sensors:
Proceed to “4. Pairing an ANT+ sensor”.
• For users without a sensor:
Proceed to “5. Mounting the bracket, and attaching/removing the AVVENTURA”.
Copyright © 2020 CATEYE Co., Ltd.