Auto lap function
Laps can be recorded automatically without any button operation according to distances, times, or locations set in advance.
When the lap is recorded, the lap information is displayed temporarily before returning to the original measurement screen.
Important
To use the Auto lap function, the recording conditions set using the app must be transferred to the AVVENTURA before performing measurement.
The settings will be applied when Auto lap is turned on and the device is connected to the smartphone.
* The settings can be accessed by tapping 
(Other) > [General] > [Auto Lap].
The following gives an example of initial configuration of the lap screen.
*1: Up to 998 laps, including both the lap number and the auto lap number, can be recorded.
*2: The display shows the measurement status of the auto lap being measured and the lap count.
* Under the initial configuration, Lap Screen 2 is undefined (not shown). Configure the screen display, lap data, and display time as necessary.
Changing the lap screen
Copyright © 2020 CATEYE Co., Ltd.