Smart computer screen
The screen segments and display functions to be displayed on the measurement screen can be assigned through screen customization.
Changing the measurement screen
The following explains about customizable display, using the default screen as an example.
* Tap to display an explanation. Tap it again to close the window.
Measurement screen
Simple Navigation display
Explanation of icons:
(Night Mode)
Turns on when the Night Mode setting is ON.
* The Night Mode settings can be accessed by tapping 
(Other) > [Device] > [PADRONE SMART+].
(Compass)
Allows you to check which direction is north.
／ 
(Incoming call/email notification icon)
The display shows how many incoming calls and emails, and flashes to notify you.
Important
Email notifications valid only with the email addresses registered with [Add Account].
* When you turn on the DI2 system's synchro shift mode, the incoming notification icon is not displayed.
* The incoming notification icons and count are reset when measurement is paused, reset, or finished.
S-1 / S-2 / M (Synchro shift mode)
When you are using a DI2 system, you can display the current synchro shift mode.
• S-1 (Shift mode 1)
• S-2 (Shift mode 2)
• M (Manual mode)
* The synchro shift mode settings can be accessed by tapping (Other) > [Device] > [DI2].
Device
* When you turn on synchro shift mode, the incoming notification icon is not displayed.
(Remaining smartphone battery)
Indicates the smartphone's remaining battery.
(Smart computer battery alarm)
Flashes when the smart computer's remaining battery power is low. Replace battery as soon as possible.
(GPS sensitivity)
Indicates GPS signal reception status.
(Sensor signal icon)
Indicates the Bluetooth® sensor's signal reception status.
*1: With the speed/cadence (ISC) sensor, S and C are displayed simultaneously.
• Types of icons:
S (Speed signal) *1
Indicates the speed sensor signal.
C (Cadence signal) *1
Indicates the cadence sensor signal.
S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.
H (Heart rate signal)
Indicates the heart rate sensor signal.
P (Power signal)
Indicates the power sensor signal.
(DI2 system signal)
Indicates the Shimano DI2 system signal.
• Icon states:
On
Receiving signal in Mirror Mode
Off
No signal
(Pace arrows)
Indicate whether the current speed is faster () or slower () than the average speed.
• 
• 
• 
(measurement unit)
Displays the currently selected measurement unit.
• On
Measurement stopped
• Flashing
Measurement in progress
Measurement screen
Displays various measurement data.
• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period start flashing to indicate that it is time to replace the battery.
* For the CATEYE sensor battery replacement procedure, refer to the sensor’s online manual.
• Power values flash:
When using separate left and right power sensors, power values flash on and off to indicate that only signals from one sensor are being received.
Direction and straight-line distance
Displays the direction and straight-line distance to the goal (or the start point).
Copyright © 2021 CATEYE Co., Ltd.