2. Pairing
Important
This section explains how to pair the smart computer and the sensor using the “Cateye Cycling™” smartphone app.
To pair the sensor directly to the computer without a smartphone, refer to your computer’s online manual or instruction manual.
The Cateye Cycling™ smartphone app (free) must be installed on the smartphone to be used in advance.
* For the latest information on the smartphones that are compatible with Cateye Cycling™ operations, see “Cateye Cycling™ Recommended Devices”.
Pairing via Bluetooth
Smartphone
Important
Perform pairing at a distance of no more than 10 m.
1. From the startup screen, tap [Start] and begin pairing.
* If the startup screen does not appear, tap (Startup) at the top left of the screen to display it.
2. Press the button on the heart rate sensor to transmit the sensor signal and begin pairing.
The LED indicator turns on.
Press
LED indicator
When Cateye Cycling™ detects the sensor signal, a message will be displayed on the smartphone.
Tap [Pair to Device]. The verified sensor (CATEYE OHR-31) is displayed under [Device] and pairing is completed.
* When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor name (HR).
3. After pairing is complete, turn off the power of the heart rate sensor.
Press and hold the button on the heart rate sensor, and release your finger when the LED indicator turns red.
Note
• When using the smart computer in Sensor Direct Mode:
Connect the smart computer to Cateye Cycling™, and then transmit the paired sensor information.
STRADA SMART/PADRONE SMART: Connecting smart computer and smartphone
PADRONE SMART+: Connecting smart computer and smartphone
• When using PADRONE SMART+:
Heart rate will not be displayed on the measurement screen in default configuration.
Customize the measurement screen to display heart rate.
When using ANT+ to perform pairing or pairing with an other brand computer
Refer to the instruction manual of the computer.
Copyright© 2022 CATEYE Co,.Ltd.