2. Pairing

Important

This section explains how to pair the smart computer and the sensor using the “Cateye Cycling™” smartphone app.

To pair the sensor directly to the computer without a smartphone, refer to your computer’s online manual or instruction manual.

The Cateye Cycling™ smartphone app (free) must be installed on the smartphone to be used in advance.

If using an iPhone

If using an Android smartphone

* For the latest information on the smartphones that are compatible with Cateye Cycling™ operations, see “Cateye Cycling™ Recommended Devices”.

Smartphone

1. Verify that [Connect] is set to ON in the (MENU), and then tap [Device].

Tap [Pair to Device] to start pairing.

2. Rub both of the heart rate sensor’s electrode pads with your thumbs to transmit the signal.

Electrode pads

When Cateye Cycling™ detects the sensor signal, a message will be displayed on the smartphone.

Tap [Pair to Device]. The verified sensor (CATEYE HR-12) is displayed under [Device] and pairing is completed.

* When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor name (HR).

Note

• When using the smart computer in Sensor Direct Mode:

Connect the smart computer to Cateye Cycling™, and then transmit the paired sensor information.

STRADA SMART/PADRONE SMART: Connecting smart computer and smartphone

PADRONE SMART+: Connecting smart computer and smartphone

 

• When using PADRONE SMART+:

Heart rate will not be displayed on the measurement screen in default configuration.

Customize the measurement screen to display heart rate.

PADRONE SMART+: Changing the measurement screen

Copyright© 2022 CATEYE Co,.Ltd.