2. Pairing
Important
This section explains how to pair the smart computer and the sensor using the “Cateye Cycling™” smartphone app.
To pair the sensor directly to the computer without a smartphone, refer to your computer’s online manual or instruction manual.
The Cateye Cycling™ smartphone app (free) must be installed on the smartphone to be used in advance.
If using an iPhone
If using an Android smartphone
* For the latest information on the smartphones that are compatible with Cateye Cycling™ operations, see “Cateye Cycling™ Recommended Devices”.
Pairing via Bluetooth
Smartphone
1. Verify that [Connect] is set to ON in the (MENU), and then tap [Device].
Tap [Pair to Device] to start pairing.
2. Shake the sensor, or rotate the crank where it is mounted to transmit the signal.
When Cateye Cycling™ detects the sensor signal, a message will be displayed on the smartphone.
Tap [Pair to Device]. The verified sensor (CATEYE CDC-30) is displayed under [Device] and pairing is completed.
* When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor name (CDC).
Note
• When using the PADRONE SMART+ in Sensor Direct Mode:
Connect the PADRONE SMART+ to Cateye Cycling™, and then transmit the paired sensor information.
PADRONE SMART+: Connecting smart computer and smartphone
* This sensor cannot be used with STRADA SMART / PADRONE SMART in Sensor Direct Mode. Use in Mirror Mode instead.
• When using PADRONE SMART+:
Cadence will not be displayed on the measurement screen in default configuration.
Customize the measurement screen to display cadence measurements.
When using ANT+ to perform pairing or pairing with an other brand computer
Refer to the instruction manual of the computer.
Copyright© 2022 CATEYE Co,.Ltd.