During measurement

Try the following solutions in order, starting from the top.

Switch the PADRONE SMART+ to Sensor Direct Mode, and then return to Mirror Mode once again.

 

1. Press and hold MODE for 1 second to switch to Sensor Direct Mode.

(1 second)

Measurement screen (Sensor Direct Mode)

2. Press and hold MODE for 1 second once again to return to Mirror Mode.

(1 second)

Smartphone search (Mirror Mode)

Confirm the change from smartphone search to the connection screen, and the return to the measurement screen.

Display the Cateye Cycling™ screen on the smartphone.

Confirm that the connection is restored.

* When connected by displaying Cateye Cycling™,
Commercial paired sensors may be the cause. This may be improved by removing the commercial sensor under (Menu) > [Device] in Cateye Cycling™, and pairing once again.

Did Cateye Cycling™ terminate unintentionally?

Start Cateye Cycling™ once again.

* Tap “Continue” to resume the measurement. (In the case of Android phones, it will be continued automatically.)

Is the connection disabled in Cateye Cycling™?

Enable the connection.

Are you also using other wireless devices simultaneously (including other Bluetooth products)?

Stop using the devices simultaneously and confirm that the connection is restored.

* If you cannot find the appropriate symptom, see “Frequently Asked Questions”.

Copyright © 2017 CATEYE Co,.Ltd.