FAQ
What is CatEyeSYNC™?
• Power on/off synchronization:
Headlight, taillight and safety light• Lighting mode (flash pattern) synchronization:
Mode changing for rear light and safety light only (with individual configuration possible via the app)• Lighting mode customization:
Headlight only• Checking remaining battery level:
Headlight, taillight and safety light (via the app)
How do I pair the light with CatEyeSYNC™ app?
Open the app and tap [Add Device] to pair a light.
If no device (light) is detected, reset the pairing information as described below.
Resetting pairing information
1. Press and hold the switch on the light for 3 seconds to enter the sleep state. (The LED will flash three times.)
2. Continue pressing and holding the switch for at least 10 seconds to reset the pairing information. (The LED will flash 10 times.)
Can I use the lights without pairing with and/or connecting to CatEyeSYNC™ app?
The lights can be used alone.
To synchronize the lights, all lights must be paired via the CatEyeSYNC™ app.
All paired lights will remain synchronized even when the app is not open.
Can I turn off synchronization of a specific light?
Press and hold the power switch on the light for 3 seconds.
The indicator on the light will flash three times as the light enters the sleep state.
In this state, the light is not connected to CatEyeSYNC™ or other lights.
When are status notifications displayed on the smartphone?
A notification is displayed when the remaining battery power is low and the indicator turns on, or when charging is complete and the charging indicator turns off.
* NOTIFICATION [Lights Battery] needs to be turned on under [App Setting] on the CatEyeSYNC™ app.
Copyright © 2021 CATEYE Co,.Ltd.