CATEYE PADRONE SMART +
Start measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Smart computer
Laps can be recorded automatically without any button operation according to distances, times, or locations set in advance.
When the lap is recorded, the lap information is displayed temporarily before returning to the original measurement screen.
* The displayed lap screen can be edited as desired. The following gives an example of initial configuration of the lap screen.
* This feature can be used in conjunction with the lap function.
*1 A number that includes both the lap number and the auto lap number will be displayed.
If the total number of laps exceeds 999, the following laps will not be recorded.
*2 The display shows the measurement status of the auto lap being measured and the lap count.
* Under the initial configuration, Lap Screen 2 is undefined (not shown). Configure the screen display, lap data, and display time as necessary.
* The Auto lap function settings can be accessed by tapping 
(Other) > [General] > [Auto Lap].
Countdown function
Target altitude difference
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
If you have a Shimano DI2 system