Explanation of icons:

​ (Night Mode)

Turns on when the Night Mode setting is ON.

* The Night Mode settings can be accessed by tapping (MENU) > [Device] > [PADRONE SMART+].
​ Device

 

S-1 / S-2 / M (Synchro shift mode)

When you are using a DI2 system, you can display the current synchro shift mode.

• S-1 (Shift mode 1)

• S-2 (Shift mode 2)

• M (Manual mode)

* The synchro shift mode settings can be accessed by tapping (MENU) > [Device] > [DI2].
​ Device

 

​ (Smart computer battery alarm)

Flashes when the smart computer's remaining battery power is low. Replace battery as soon as possible.

​ Battery Replacement : Smart computer

 

​ (Sensor signal icon)

Indicates the Bluetooth® sensor's signal reception status.

• Types of icons:

S (Speed signal)
Indicates the speed sensor signal.

C (Cadence signal)
Indicates the cadence sensor signal.

S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.

H (Heart rate signal)
Indicates the heart rate sensor signal.

P (Power signal)
Indicates the power sensor signal.

​ (DI2 system signal)
Indicates the Shimano DI2 system signal.

• Icon states:

Flashing
Signal being received in Sensor Direct Mode

Off
No signal

 

​ (Pace arrows)

Indicate whether the current speed is faster () or slower () than the average speed.

 

​・・ ・ (measurement unit)

Displays the currently selected measurement unit.

• On

Measurement stopped

• Flashing

Measurement in progress

Measurement screen

Displays various measurement data.

• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period start flashing to indicate that it is time to replace the battery.

​ Battery replacement : Optional sensors

• Power values flash:
When using separate left and right power sensors, power values flash on and off to indicate that only signals from one sensor are being received.