​

Details displayed:

​ Data displayed at top of screen

Displays current speed.

* Can be changed to display heart rate or cadence.

​ Device : Smart computer : Display Customization

 

​ Current function

Measured values change every time MODE is pressed.

* If the values flash on and off, it is time to replace the sensor battery.

• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period start flashing to indicate that it is time to replace the battery.

* For the CATEYE sensor battery replacement procedure, refer to the sensor’s online manual.

• Power values flash:
When using separate left and right power sensors, power values flash on and off to indicate that only signals from one sensor are being received.

 

​ Dot section (MODE button)

When the computer is mounted on the bracket, pressing the dot section depresses the MODE button.

​

 

​

Explanation of icons:

​ (Battery alarm)

Flashes when smart computer's remaining battery power is low.

When this icon flashes, replace batteries as soon as possible.

​ Battery replacement

 

​ (Memory alarm)

Turns on when smart computer's remaining memory is low.

After the icon turns on, the oldest summary data is deleted to create space to record new data.

* Memory is used to record summary data in Sensor Direct Mode.

* Memory can be cleared by importing summary data into Cateye Cycling™.
​ Importing summary data

 

​ (Pace arrows)

Indicate whether the current speed is faster () or slower () than the average speed.

 

​ (Sensor signal icon)

Indicates the Bluetooth® sensor's signal reception status.

*1: With the speed/cadence (ISC) sensor, S and C are displayed simultaneously.

• Types of icons:

S (Speed signal) *1
Indicates the speed sensor signal.

C (Cadence signal) *1
Indicates the cadence sensor signal.

H (Heart rate signal)
Indicates the heart rate sensor signal.

P (Power signal)
Indicates the power sensor signal.

 

• Icon states:

Flashing
Signal being received

Off
No signal

 

​ (Tire size)

Appears when setting tire circumference.

 

​ • • • (Measurement unit)

Displays the currently selected measurement unit.

• On
Measurement stopped

• Flashing
Measurement in progress

 

​ (Average)

Indicates that the currently displayed value is an average value.

 

​ (Maximum)

Indicates that the currently displayed value is a maximum value.

 

Current function

Indicates the currently displayed function.

• (Total Distance)

• (Elapsed Time)

• (Heart Rate)

• (Trip Distance)

• (Trip Distance 2)

• (Current Speed)

• (Cadence)

• (Power)

• (Clock)